Figure 15-67 user waypoints – BendixKing KSN 770 - Pilots Guide User Manual
Page 344

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-71
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
The various nearest waypoint lists can also be displayed by touching
the touchscreen buttons in the header field in the
DIRECT TO
pop--up
window.
Selecting the
PBD
(place/bearing/distance) bezel softkey displays
the
TEMP WAYPOINT
window, which permits the pilot to create a
temporary waypoint used to perform a Direct--To. Creating a temporary
waypoint is described earlier in this section.
Selecting the
USER
bezel softkey, displayed when the Direct--To
bezel key is pushed, permits the pilot to perform a Direct--To a
user--defined waypoint. When the
USER
bezel softkey is selected, the
USER WAYPOINTS
window, shown in Figure 15--67, is displayed.
Figure 15--67
User Waypoints
A user--defined waypoint can be selected from the list or the pilot can
change or add waypoints to the list. Changing and adding user--defined
waypoints is described later in this section.
The
BACK
bezel softkey returns to the previous display without
making any changes.