BendixKing KSN 770 - Pilots Guide - Manual (Page 268)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 14-1
Course Deviation Indicator (CDI) and Switching View
Honeywell International Inc. Do not copy without express permission of Honeywell.
14. Course Deviation Indicator
(CDI) and Switching View
INTRODUCTION
This section describes the GPS--based CDI and (for the KSN 770) the
built--in GPS NAV switching. The CDI indicates lateral deviation from
the centerline of a selected GPS course. The CDI is composed of a
green course pointer, segmented needle, and a scale, as shown in
Figure 14--1.
Figure 14--1
Course Deviation Indicator
The GPS course deviation indicator view is displayed by pushing the
MFD bezel key then pushing the VIEW bezel key or rotating the
joystick knob until the GPS CRS DEV view is displayed.
The CDI touchscreen button (current navigation source) is displayed
next to the radio tuning and display window at all times to provide an
indication of the navigation source.
NOTE: For installations where the EFIS controls the CDI switching
or when the CDI is set to GPS only during installation, the CDI
touchscreen button is not displayed.