BendixKing KSN 770 - Pilots Guide - Manual (Page 68)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Display States and Mode Control
3-12
Honeywell International Inc. Do not copy without express permission of Honeywell.
Panning View Control Mode
When in navigation map view, weather view, or charts view, panning is
activated by momentarily pushing the joystick knob in any direction.
Panning mode is indicated by a magenta PAN symbol displayed in the
lower--right corner of the display and PAN MODE displayed in the
upper--center of the navigation map display, as shown in Figure 3--9.
NOTE: PAN MODE is displayed in the upper--right corner for charts
view and weather view.
Figure 3--9
Panning Activated Navigation Map Display
When panning is activated, the navigation map, weather, and charts
display freeze in the last orientation and do not move to reflect changes
in aircraft heading. The ownship symbol continues to orientate with
aircraft heading or track. Caution should be used when panning and
maneuvering to avoid potential disorientation.
When the panning is activated, PSH FOR BACKS and Zoom are
displayed in the lower--right corner to indicate zoom can be controlled
by rotating the joystick knob. Also, LOCKED is displayed below the
true north orientation indicator symbol, which reminds the pilot that
when in panning mode, the display freezes in the last orientation and
does not move to reflect changes in aircraft heading.
NOTE: When panning is activate, the true north orientation indicator
is displayed, even when selected off in the menu.
When panning is activated, the view is centered when the zoom- in/+
or zoom- out/- bezel key is pushed or the joystick is rotated to zoom
in and out on the location of the cursor.