BendixKing KSN 770 - Pilots Guide - Manual (Page 346)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-73
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
DIRECT--TO A WAYPOINT NOT IN THE FLIGHT PLAN
When a Direct--To is performed to a waypoint not contained in the active
flight plan (APT, NAV, INT, USER, or PREV waypoint), the remainder
of the waypoints in the active flight plan are grayed out, as shown in
Figure 15--69.
NOTE: Suspend is entered when a Direct--To off path is performed.
Figure 15--69
Direct--To a Waypoint Not in the Flight Plan
When the aircraft passes over the Direct--To waypoint not in the Flight
Plan, the CDI goes to FROM and the outbound track is unchanged from
the inbound track.
There are three options to exit suspend:
1. Execute a direct--to a waypoint in the active flight plan.
2. Add more waypoints to the Direct--To a waypoint not in the flight
plan.
3. Push the Direct--To bezel key then push UNDO .