BendixKing KSN 770 - Pilots Guide - Manual (Page 46)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
User Interface and System Overview
2-10
Honeywell International Inc. Do not copy without express permission of Honeywell.
PAGE BEZEL KEY
Pushing the PAGE bezel key toggles the layouts in the
selected function (MFD or FMS).
VIEW BEZEL KEY
When the MFD function is selected, pushing the VIEW
bezel key changes the view within the selected
window. The view content is the data that is displayed
in each window (for example, terrain, traffic, stormscope, etc.). When
the FMS function is selected, pushing the VIEW bezel key has no
control function and the annunciation
No VIEW control in FMS function is displayed.
The view selection state is described in detail in Section 3, Display
States and Mode Control.
Bezel Softkeys
Bezel softkeys are software configurable keys that perform
context--sensitive functions based on the focused window. The KSN
765/770 has five right bezel softkeys and two left bezel softkeys, as
shown in Figure 2--4. When a bezel softkey performs an action, a bezel
softkey label is displayed adjacent to the bezel softkey. When no label
is displayed, no action is performed when the adjacent bezel softkey is
pushed.
Bezel softkeys are described in detail in Section 3, Display States and
Mode Control.
Interactive Touchscreen Interface
The KSN 765/770 features an integrated resistive touchscreen display.
The touchscreen functionality is used for various tasks including (but
not limited to) touchscreen button selection, map panning, data input
using the appropriate on--screen keypad, and scrolling (by touching and
dragging a scroll bar when displayed).
Resistive touchscreen displays respond to pressure put on the surface
and have proven reliability. Contact can be made with a finger or any
other pointing device. The KSN 765/770 units work well with both
gloved fingers and bare fingers.
The touchscreen becomes active when pressed. After 5 seconds of no
touchscreen activity, the touchscreen becomes inactive. This is to
prevent inadvertent activations.