BendixKing KSN 770 - Pilots Guide - Manual (Page 349)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-76
Honeywell International Inc. Do not copy without express permission of Honeywell.
Changing the FROM Waypoint
The pilot can choose to make a waypoint in the active flight plan the
FROM waypoint by using the ACTV bezel softkey. The ACTV bezel
softkey label is displayed on the left--side of the display, as shown in
Figure 15--73, when the following conditions are met:
D
The flight plan waypoint list has focus
D
The EDIT bezel softkey label is active
D
A minimum of three waypoints are in the flight plan.
Figure 15--73
Activate FROM Waypoint
Waypoints not permitted to be converted to FROM using the ACTV
bezel softkey are:
D
The first waypoint in the flight plan list (origin or FROM)
D
The last waypoint in the flight plan list (destination)
D
Any waypoints between the FAWP and MAWP, including the FAWP
and MAWP in a published approach procedure
D
Any waypoint in the missed approach
D
A runway waypoint
D
An INTXX waypoint or part of a procedure turn
D
An altitude terminating leg
D
A discontinuity.