Fms home window – BendixKing KSN 770 - Pilots Guide User Manual
Page 282

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-9
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
FMS Home Window
FMS Home -- The mode of the
FMS is displayed to the right of
the
HOME
annunciator. The
displayed mode indicates the
current mode the FMS is
operating in. The possible FMS modes and description of each mode
are as follows:
D
Active Flight Plan
-- Displayed when the flight plan is active.
D
Flight Plan Edit
-- Displayed when flight plan is in edit mode. The
flight plan is in edit mode when the waypoint list window is active and
the
EDIT bezel softkey label
is active.
D
Stored FP List
-- Displayed when stored flight plan names are
displayed in the waypoint window.
D
FP Store Name
-- Displayed when the flight plan name can be
modified before being stored.
D
New Flight Plan Edit
-- Displayed when a new flight plan is
created that can be activated to replace an active or stored flight
plan.
D
OBS CRS:
-- Displayed when omni bearing selector (OBS) mode
is active.
Flight Plan Name -- The name of the flight plan is displayed under the
HOME
annunciator. The power--up default flight plan name is the
active flight plan in the FMS before a power cycle, or blank if the flight
plan was cleared before a power cycle. The flight plan name is
automatically created from the first and last waypoint names in the flight
plan or from the Stored Route name.