BendixKing KSN 770 - Pilots Guide - Manual (Page 160)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Charts View
7-6
Honeywell International Inc. Do not copy without express permission of Honeywell.
To enter the procedures list for the displayed airport, toggle the joystick
knob down to the procedures list and then rotate the joystick knob.
Pushing in the joystick knob selects the highlighted chart.
A prefix is displayed before the chart heading to indicate the chart type
(i.e., MIN for takeoff minimums, alternate minimums, and radar
minimums, STAR and arrival procedures, IAP for instrument
approach procedures, APD for the airport diagram, and DP for
departure procedures).
To change the airport and the associated charts, rotate and toggle the
joystick knob to enter the desired new airport identifier. Alternatively, the
touchscreen can be used to change the airport identifier by touching the
airport selection box at the top of the airport list and using the QWERTY
keypad to enter the new airport identifier.
DEP, DEST, AND NRST BEZEL SOFTKEY LABELS
When the LIST bezel softkey label is active, the second, third and
fourth right bezel softkey labels display DEP , DEST , and NRST
respectively.
D
DEP -- Pushing the DEP bezel softkey automatically fills the
identifier of the airport (with an instrument approach procedure)
closest to the startup latitude/longitude point. In addition, the
SELECTING DEPARTURE message is displayed for 1 second.
D
DEST -- Pushing the DEST bezel softkey automatically fills the
identifier of the airport (with an instrument approach procedure)
closest to the destination latitude/longitude point or the airport
closest to the startup latitude/longitude point when a destination is
not entered in the flight plan. In addition, the
SELECTING DESTINATION message is displayed for 1 second.
D
NRST -- Pushing the NRST bezel softkey automatically fills the
identifier of the nearest airport (with an instrument approach
procedure) to the aircraft present position. At startup, this is the
same as the DEP bezel softkey. In addition, the
SELECTING NEAREST message is displayed for 1 second.
NOTES: 1. The destination latitude/longitude is based on the flight
plan of the FMS.
2. The DEP , DEST , and NRST bezel softkey labels
are removed from display if the aircraft position
becomes unavailable.