BendixKing KSN 770 - Pilots Guide - Manual (Page 276)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-3
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
D
Named waypoints
— IDENT
— Latitude/longitude
— Type (named intersection, navigation database (NDB), terminal
area procedure waypoint)
— Country code.
D
Unnamed waypoints
— Latitude/longitude.
The active navigation database effectivity date range is
displayed on the menu next to the green NAV DB ,
shown in Figure 15--1, and also on the
acknowledgement confirmation page, described earlier in this guide.
The NAV database cycle is changed by selecting the bezel softkey next
to the PUSH TO CHANGE NAV DB CYCLE label.
Figure 15--1
Navigation Database
The FMS retrieves information from the navigation database about
waypoints and procedures used in flight planning. The database,
supplied by BendixKing, is updated every 28 days. Two consecutive
cycles can be loaded. The database can be updated by the pilot, and
data loading procedures are described in detail in Section 16, Data
Loading Procedures.