BendixKing KSN 770 - Pilots Guide - Manual (Page 392)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-119
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
The joystick knob or touchscreen can be used to enter the desired
waypoint name in the IDENT field. After the custom waypoint name is
defined, the cursor can be moved to the latitude field by pushing down
on the joystick knob or using the touchscreen. The joystick knob can
then be rotated and pushed left or right until the desired latitude is
defined or the touchscreen can be used to select the desired location
on the map display. Figure 15--114 shows the data entered for the
example flight plan.
NOTE: The waypoint name is displayed on the map display.
Figure 15--114
Custom User Waypoint
The PPOS bezel softkey can be used to enter the present aircraft
position in the LAT and LON fields to be used as a user waypoint.
When the desired waypoint name and latitude/longitude are entered in
the USER WAYPOINT field, as shown in Figure 15--114, the waypoint
is entered into the custom waypoint list by pushing the OK bezel
softkey. Pushing the BACK bezel softkey returns to the previous page
without saving any waypoint data.