Figure 15-128 stored flight plan activated – BendixKing KSN 770 - Pilots Guide User Manual
Page 404

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-131
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
The following paragraphs describe the bezel softkey labels displayed
on this page:
D
The
ACTV
bezel softkey activates the stored flight plan displayed
in the waypoint list window.
D
The
CHNG
bezel softkey is displayed when any waypoint other
than the origin is selected and permits the pilot to change any of the
en route or destination waypoints before activating the flight plan.
D
The
DEL
bezel softkey is displayed when any waypoint other than
the origin is selected and permits the pilot to delete any of the
displayed waypoints before activating the flight plan.
D
The
INS
bezel softkey (not shown in Figure 15--127) is displayed
when the cursor is not on a displayed waypoint.
D
The
CLR
bezel softkey permits the pilot to clear the entire stored
flight plan waypoint list.
D
The
PROC
bezel softkey permits the pilot to add a desired
procedure before activating the flight plan.
D
The
STOR
bezel softkey moves the cursor to the flight plan name
field, which permits the pilot to modify the flight plan name and store
the flight plan when desired.
When the
ACTV
bezel softkey is selected, the FMS mode changes
from
New Flight Plan Edit
to
Active Flight Plan
, as shown in
Figure 15--128. The stored flight plan is now active in the flight plan list.
Figure 15--128
Stored Flight Plan Activated