BendixKing KSN 770 - Pilots Guide - Manual (Page 407)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-134
Honeywell International Inc. Do not copy without express permission of Honeywell.
The flight plan is selected by pushing the SEL bezel softkey. When
selected, the waypoint list displays the stored flight plan waypoints
(including departure and arrival airports) in reverse order, as shown in
Figure 15--132.
NOTE: SIDs, STARs, and approaches are not saved in the stored
flight plan.
Figure 15--132
Activate Prompt
The following paragraphs describe the bezel softkey labels displayed
on this page:
D
The ACTV bezel softkey activates the stored flight plan displayed
in the waypoint list window.
D
The CHNG bezel softkey label is displayed when any waypoint
other than the origin is selected and permits the pilot to change any
of the en route or destination waypoints before activating the flight
plan.
D
The DEL bezel softkey label is displayed when any waypoint other
than the origin is selected and permits the pilot to delete any of the
displayed waypoints before activating the flight plan.
D
The INS bezel softkey label (not shown in Figure 15--132) is
displayed when the cursor is not on a displayed waypoint.
D
The CLR bezel softkey permits the pilot to clear the entire stored
flight plan waypoint list.