BendixKing KSN 770 - Pilots Guide - Manual (Page 243)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Weather Radar View
11-8
Honeywell International Inc. Do not copy without express permission of Honeywell.
Forced Standby Mode -- The forced standby mode provides
automatic safety controls to ensure the weather radar (when in WX or
GMAP) does not transmit when the aircraft is on the ground. The
weather radar operational mode is forced to standby when the following
conditions are met:
D
Weather radar control mode is ON
D
Aircraft air/ground monitor indicates the aircraft is on the ground or
invalid.
When in forced standby mode, only STANDBY and TEST modes are
available.
The WX control and operational modes are displayed in the top--right
of the Weather Radar view . Table 11--2 lists the operational mode
annunciations.
Table 11--2
Operational Mode Annunciations
WX Radar
Selected
Mode
WX Radar Mode
Annunciation Annunciation Criteria
OFF OFF WX radar is in off mode
STBY STANDBY
WX radar is in standby
mode or forced standby
mode
TEST TEST WX radar is in test mode
WX WEATHER Normal WX mode
WX + ARL WEATHER/ARL ARL is selected
GMAP GROUND MAP
System is in the air and
ground map is selected