BendixKing KSN 770 - Pilots Guide - Manual (Page 136)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Navigation Map View
6-38
Honeywell International Inc. Do not copy without express permission of Honeywell.
CURSOR
When panning is active, the cursor is displayed in white with two lines
(horizontal and vertical) extending to the edge of the window, as shown
in Figure 6--18. To activate the cursor, briefly hold the joystick in any
direction (up/down/left/right).
Figure 6--18
Cursor
The cursor position remains stationary until the joystick knob is moved
or the touchscreen is pushed. Holding the joystick knob in a single
direction changes the rate of the cursor movement.
Rotating the joystick knob changes the zoom level, as indicated by
Zoom in the lower--right corner of the display. The zoom level can
also be adjusted by pushing the zoom--in/+ and zoom--out/-- bezel keys.
NOTE: When the range of the display is decreased using either
method, the map pans so the cursor position becomes the
center of the view.
Cursor Selection Box
The cursor selection box displays associated detailed information,
which changes depending on where the cursor is positioned. For
example, when the cursor is centered over an airport, the cursor’s
detailed information includes the airports identifier, bearing and
distance, estimated time en route (ETE), elevation, and weather and
instrument approach information (when available).