Figure 6-29 gps fail, Invalid gps states – BendixKing KSN 770 - Pilots Guide User Manual
Page 154

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Navigation Map View
6-56
Honeywell International Inc. Do not copy without express permission of Honeywell.
SELECTING CHARTS WITH THE NAVIGATION MAP
When a detail information box is displayed for an airport that has a
terminal procedure, the
CHRT
navigation map bezel softkey label is
displayed. When the
CHRT
bezel softkey is selected, the
charts view
is displayed.
An airport diagram at the selected airport is displayed (when available)
when the airspeed is less than 60 knots.
Pushing the
CHRT
bezel softkey when the airspeed is greater than
60 knots (or the airport diagram is unavailable) displays an instrument
approach procedure (IAP).
Exiting the charts view control mode is accomplished by selecting the
RTRN
bezel softkey.
INVALID GPS STATES
If the internal GPS sensor is invalid or failed, an amber
GPS FAIL
annunciator is displayed at the bottom of the display, as shown in
Figure 6--29.
Figure 6--29
GPS Fail
If there is a loss of integrity monitoring, an amber
LOI
annunciator is
displayed.
In the event of a complete GPS failure, the navigation map stops
moving and reverts to a stationary map orientated NORTH UP and the
ownship symbol is removed. The navigation map may be manually
panned to correlate to the estimated aircraft position by other means.