Trip planner – BendixKing KSN 770 - Pilots Guide User Manual
Page 427

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-154
Honeywell International Inc. Do not copy without express permission of Honeywell.
Trip Planner
The Trip Planner page, shown in Figure 15--145, is displayed by
pushing the
TRIP PLANNER
touchscreen softkey. The Trip Planner
page is used to display sunrise/sunset times, distance, direct track,
ETE, and ETA at the destination.
Figure 15--145
Trip Planner Page
The following paragraphs describe the Trip Planner page fields.
Distance -- The distance between the flight legs or waypoints entered
in the origin and destination field, is displayed in this field.
Origin Wpt/Flight Plan/Latitude and Longitude -- The touchscreen
softkey displayed in this field changes depending on what is selected
in the
MODE
field. When the
Origin Wpt
touchscreen softkey is
displayed, the origin waypoint can be manually entered by the pilot.
When the
Flight Plan
touchscreen softkey is displayed, the pilot can
select from a list of stored flight plans to use for origin and destination
calculations. When the present position latitude and longitude is
displayed in cyan, the present position is used as the origin waypoint.
When the last valid GPS position is displayed in gray, last valid GPS
position is used as the origin waypoint.
Mode -- Possible modes are
WPT
,
FLT PLAN
, and
PPOS
(or
LAST POS
). When the mode is
WPT
, the
Origin Wpt
touchscreen softkey is displayed in 1L which permits the pilot to define
the origin and destination waypoint.