Figure 12-1 strikes view, Strikes overview, Strikes view modes – BendixKing KSN 770 - Pilots Guide User Manual

Page 251

Advertising
background image

KSN 765/770 Integrated Communication Navigation Display

D200802000009

REV 2 Jun 2014

Lightning Detection View

12-2

Honeywell International Inc. Do not copy without express permission of Honeywell.

STRIKES OVERVIEW

The strikes view is selected by pushing the

MFD bezel key

then

pushing the

VIEW bezel key

or rotating the

joystick knob

until the

STRIKES view, shown in Figure 12--1, is displayed.

NOTE: When an active flight plan is available, the flight plan is

overlaid on the lightning detection view.

Figure 12--1

STRIKES View

Strikes View Modes

The pilot can select between the 360 compass view mode and the arc

view mode.

The 360 compass view mode is displayed when the

360 bezel

softkey label

is active. When the 360 compass mode is displayed, the

current aircraft symbol is located in the center of the strikes view, as

shown in Figure 12--1.

Advertising