BendixKing KSN 770 - Pilots Guide - Manual (Page 334)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-61
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the INS bezel softkey is pushed, the
INSERT NEW WAYPOINT pop--up window is displayed. The new
destination airport is chosen from the nearest airports list or can be
manually entered using the QWERTY keypad. When the waypoint is
inserted into the flight plan, KSMF is displayed after KSFO, as shown
in Figure 15--57.
Figure 15--57
New Destination Inserted
When the new destination is inserted, the flight plan name is updated
to display the new destination airport, shown as KSMF in
Figure 15--57. This is an indication to the pilot the arrival and approach
procedures for the new destination airport can be loaded using the
PROC bezel softkey when the HOME window has focus. When the
FMS waypoint list has focus, the desired airport will have to be
highlighted in order to load an arrival or approach. The pilot can add
waypoints as necessary to the flight plan using normal procedures.
To remove the previous destination and waypoints, a Direct--To can be
performed to a waypoint in the flight plan leading to the new destination,
or the undesired waypoints can be deleted from the flight plan manually.