Figure 15-2 changing nav db caution, Real time clock – BendixKing KSN 770 - Pilots Guide User Manual

Page 277

Advertising
background image

KSN 765/770 Integrated Communication Navigation Display

D200802000009

REV 2 Jun 2014

Flight Management System (FMS)

15-4

Honeywell International Inc. Do not copy without express permission of Honeywell.

Not yet effective databases are displayed in green font with -- NOT YET

VALID appended to the cycle date range. Expired databases are

displayed in green font with -- EXPIRED appending to the cycle date

range. The inactive navigation database is selected for use by pushing

the

bezel softkey

next to the inactive database. When pushed, a

caution box is displayed, as shown in Figure 15--2, which states that

changing the NAV database will clear the flight plan and pushing the

OK

softkey confirms the change. When the inactive database is

selected, the active database becomes inactive.

Figure 15--2

Changing NAV DB Caution

The aircraft operator can load a new navigation database (one that is

not yet effective) ahead of time. That database should not be used for

navigation until it becomes effective.

Databases that are loaded ahead of time but not yet effective

automatically become the active database when the KSN 765/770 is

powered up after 0900 Zulu on the first day of the effective cycle.

Real Time Clock

An internal real time clock supplies the time and date for validation of

the navigation database cycles. When global positioning system (GPS)

time is available, the time and date synchronize to the GPS.

Advertising