Figure 15-68 direct-to undo – BendixKing KSN 770 - Pilots Guide User Manual
Page 345
Advertising
KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-72
Honeywell International Inc. Do not copy without express permission of Honeywell.
DIRECT--TO UNDO
When a Direct--To is performed to a waypoint that is not part of a
published approach procedure and the waypoint has not been
sequenced, an
UNDO
bezel softkey label is displayed in 3R, as shown
in Figure 15--68, when the Direct--To bezel key is pushed.
Figure 15--68
Direct--To Undo
When the
UNDO
bezel softkey is pushed, the active flight plan is
restored to the active flight plan that was available and displayed prior
to the selection of the Direct--To function.
Advertising