BendixKing KSN 770 - Pilots Guide - Manual (Page 62)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Display States and Mode Control
3-6
Honeywell International Inc. Do not copy without express permission of Honeywell.
VIEW CONTROL MODE
The pilot can choose the displayed view in each window. To change the
view within a window, the window must have focus. The window with
focus is indicated by a magenta--framed border which differentiates
the selected window from the other windows displayed. The bezel
softkey labels associated with the window with focus are displayed
along the right side of the display, as shown in Figure 3--4.
Figure 3--4
Window Selection
Focus Selection
The full screen layout always has focus and does not need to be
selected. When the split screen layout is selected, pushing in the
joystick knob alternates the magenta--framed border from the left--
and right--side display. When the thumbnail screen layout is displayed,
pushing in the joystick knob alternates the magenta--framed border
from right--to--bottom, bottom--to--top, and top--to--right.
NOTE: A window can also be selected directly by using the
touchscreen to select the desired window.