BendixKing KSN 770 - Pilots Guide - Manual (Page 63)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 3-7
Display States and Mode Control
Honeywell International Inc. Do not copy without express permission of Honeywell.
View Selection
Within each window, the pilot can control the displayed view. Pushing
the VIEW bezel key at any time or rotating the joystick knob when the
view selection state is active changes the content of the window to a
new view. Pushing in the joystick knob or pushing the VIEW bezel key
activates the view selection state. When the view selection state is
active, the VIEW annunciator, displayed in the lower--right corner
of the display, changes to VIEW , as shown in Figure 3--5.
Figure 3--5
Inactive and Active View Control State
When the end of the available views is reached, continued pushes of
the VIEW bezel key returns to the first available view.
The joystick knob can be turned clockwise or counterclockwise to
sequence through the available views. However, once the pilot reaches
the end of the available views, the view does not wrap to the first
available view.
It is possible to have the same window content in the split screen or
thumbnail layout. Setting two or more windows to the same window
content enables the pilot to set different range scales for situational
awareness.