BendixKing KSN 770 - Pilots Guide - Manual (Page 373)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-100
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the hold settings are set as desired, the OK bezel softkey is
pushed and the hold is inserted into the flight plan. The waypoint with
the hold is displayed in the waypoint list with HLD next to it. The hold
is displayed on the NAV map display, as shown in Figure 15--92.
NOTE: HLD is also displayed in the text data bar under the holding
waypoint identifier. In Figure 15--92 HLD is displayed in
magenta because VTU is the active TO waypoint and
guidance to the waypoint is active.
Figure 15--92
Hold on Map Display