BendixKing KSN 770 - Pilots Guide - Manual (Page 430)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-157
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Press To -- The Press To field defaults to green dashes ( -------- ).
When a waypoint is entered, the field changes to COMPUTE . When
the COMPUTE touchscreen softkey is pushed, the field changes to
CANCEL , which permits the pilot to cancel the current RAIM
computations.
The ETA or waypoint data fields can be changed to initiate a new
request for computation of RAIM information, provided both the ETA
and waypoint information are entered. The entered waypoint is retained
when the window is closed such that the data is redisplayed on any
subsequent access to the page, however the ETA field is blanked and
must be re--entered each time.
RAIM STATUS -- The RAIM status field displays the status of RAIM
predictions at the entered waypoint and arrival time. The following are
possible status messages displayed in this field and the associated
meaning.
D
ENTER DESTINATION -- ETA -- A waypoint and valid ETA must be
entered in the waypoint fields before any predictions can be made.
D
READY -- RAIM status can be computed by pushing the
Press To COMPUTE touchscreen softkey displayed in 4R.
D
COMPUTING -- RAIM computation is in progress.
D
COMPUTE TIMED OUT -- RAIM prediction response from the FMS
has not been received within 45 seconds.
D
COMPUTE FAILED -- RAIM prediction response from the FMS
indicates that the computation failed.
D
AVAILABLE -- RAIM prediction response from the FMS indicates
that the computation succeeded and RAIM is available.
D
NOT AVAILABLE -- RAIM prediction response from the FMS
indicates that the computation succeeded and RAIM is not
available.
Back -- Pushing the BACK bezel softkey displays the UTILITY page.