BendixKing KSN 770 - Pilots Guide - Manual (Page 440)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 16-3
Database Loading Procedures
Honeywell International Inc. Do not copy without express permission of Honeywell.
The Est Install column displays the estimated time to install each
database in hours, minutes, and seconds format.
The Action column displays an Install or
Do Not Install touchscreen softkey for each of the three groups of
databases. When at least one of the databases in each of the three
groups is out of date, Install is the default for that group. When all of
the databases in a group are up to date, Do Not Install is the default
for the group. The Action column can be alternated using the interactive
touchscreen display to alternate between Install and
Do Not Install .
When any database is expired, the database version is displayed in red
text along with Expired .
The current date and time is displayed in the lower--left corner of the
display. The total estimated time to load all of the selected databases
is displayed in hours, minutes, and seconds format.
When all desired databases are selected for Install , pushing the
Start Load touchscreen softkey begins the data loading process.
Once database loading has started, the previously installed databases
will be erased. During the data loading process, Progress replaces the
Est Install column, as shown in Figure 16--2.
Figure 16--2
Data Loading in Progress
The progress of each database selected for installation is displayed in
the Progress column. The time remaining is displayed for each
remaining database to be loaded.