Figure 6-14 terrain overlay, Terrain overlay – BendixKing KSN 770 - Pilots Guide User Manual

Page 129

Advertising
background image

KSN 765/770 Integrated Communication Navigation Display

D200802000009

REV 2 Jun 2014

6-31

Navigation Map View

Honeywell International Inc. Do not copy without express permission of Honeywell.

Terrain Overlay

The terrain overlay permits terrain data to overlay on the navigation

map display. The terrain overlay is controlled using the TERR bezel

softkey on page

2--2

displayed in 2R shown in Figure 6--14.

Figure 6--14

Terrain Overlay

The terrain overlay is active when the

TERR

bezel softkey label is

displayed and inactive when the

TERR

bezel softkey label is

displayed.

NOTE: When the terrain overlay is inactive, only obstructions within

500 feet are displayed.

The terrain overlay and NEXRAD overlay are mutually exclusive. Only

one can be displayed at a time on the navigation map. The

TERR

bezel softkey label is inactive when the

NXRD

bezel softkey is

pushed.

When corrected barometric altitude is configured and valid, the

BARO TERR

annunciation is displayed in the lower--left corner of the

display, as shown in Figure 6--14. When barometric altitude is not

configured or invalid and geometric altitude is valid,

GPS TERR

is

displayed in the lower--left corner of the display.

If the corrected barometric altitude,

geometric altitude, aircraft position, or

heading and GPS track are invalid, a

white

TERR

annunciator is displayed

with a red (

--

) line through the annunciator and the obstruction

coloring is removed from the display.

Advertising