Figure 15-12 insert new waypoint pop-up window – BendixKing KSN 770 - Pilots Guide User Manual
Page 289
KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-16
Honeywell International Inc. Do not copy without express permission of Honeywell.
Selecting
the
INS
bezel
softkey
displays
the
INSERT NEW WAYPOINT
pop--up window. KSFO is the desired
destination airport, however it is not displayed in the nearest airports
pop--up window. When a desired waypoint is not displayed in the
pop--up window, the waypoint can be manually entered by selecting the
manual input area just below the
INSERT NEW WAYPOINT
header,
then changing the characters one at a time using the joystick knob. The
joystick knob is then toggled left and right between the character fields
and the joystick knob is rotated to change the character in each field.
Alternatively, the touchscreen can be used to enter a desired waypoint
by selecting the waypoint identifier field, shown in Figure 15--12.
Figure 15--12
Insert New Waypoint Pop--Up Window