BendixKing KSN 770 - Pilots Guide - Manual (Page 357)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-84
Honeywell International Inc. Do not copy without express permission of Honeywell.
Altitude Sequence Legs
Waypoints that sequence when a certain altitude is reached are
automatically sequenced for installations that have an air data input.
For installations that do not have an air data input, the pilot must
manually sequence each altitude leg. During an altitude sequence leg,
altitude sequence instructions are displayed in the center of the screen
along with the RESUME touchscreen button, as shown in
Figure 15--77. Selecting the RESUME touchscreen button once the
displayed altitude has been reached allows the pilot to sequence to the
next leg of the flight plan.
NOTE: Suspend is entered during an altitude sequence leg for
installations that do not have an air data input until the
RESUME touchscreen button is selected.
Figure 15--77
Sequence Waypoint
The displayed pop--up window takes over the view and the pilot must
select the RESUME touchscreen button or bezel softkey to sequence
the altitude leg manually. Other touchscreen functions are inactive until
the pilot selects the RESUME touchscreen button or bezel softkey.
NOTE: When the pop--up window is displayed, standby radio tuning
and swapping can be controlled using the radio control
knob and frequency swap bezel key , and the GPS/VLOC
NAV source can be changed using the touchscreen button or
the GPS / VLOC bezel softkey. The MENU bezel keys are
also available during pop--up annunciations.