BendixKing KSN 770 - Pilots Guide - Manual (Page 391)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-118
Honeywell International Inc. Do not copy without express permission of Honeywell.
A custom user waypoint is added by pushing the ADD bezel softkey.
When the ADD bezel softkey is pushed, a USER WAYPOINT
window, shown in Figure 15--113, is displayed, which permits the pilot
to define the custom waypoint. The pilot can define a custom waypoint
by using latitude/longitude or bearing/distance. The default display is
latitude/longitude with the current aircraft position.
Figure 15--113
USER WAYPOINT
Any combination of 5 letters and numbers can be used to define a
custom waypoint name. The joystick knob can be rotated to change the
letters and numbers in the IDENT field or the QWERTY keypad can
be displayed by touching the IDENT field on the touchscreen.
NOTE: When the identifier used to name the new waypoint already
exists in the navigation database, the new waypoint is
inserted as a custom waypoint, replacing the previously
defined waypoint.
Pushing in on the joystick knob toggles to the NAV MAP display. When
the NAV MAP has focus, the joystick knob can be used to pan or the
touchscreen can be used to select a user waypoint.
For the example flight plan, a custom waypoint is to be defined at
32 degrees, 32 minutes North and 123 degrees, 20 minutes South.
MYWPT is the desired custom waypoint name.