BendixKing KSN 770 - Pilots Guide - Manual (Page 318)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-45
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Missed Approach Procedures
The missed approach procedure is an integral part of the approach
procedure. The missed approach procedure begins at the MAWP, and
is separated from the approach by a Missed Approach header within
the waypoint list, as shown in Figure 15--40.
Figure 15--40
Missed Approach Procedure
The missed approach procedure is activated by pushing the MA bezel
softkey or by pushing the MA touchscreen button when the missed
approach pop--up window is displayed.
NOTE: Suspend is entered after crossing the MAWP and the missed
approach is not initiated prior to the MAWP. The CDI will go
to FROM and the outbound course is the same as the
inbound course. The flight plan is suspended until the missed
approach is selected.
The MA bezel softkey label is displayed when the FAWP of the
approach procedure is the active To waypoint and either the waypoint
list or home field is selected.
NOTE: The MA bezel softkey label is not displayed when the NAV
MAP window is selected.