BendixKing KSN 770 - Pilots Guide - Manual (Page 400)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-127
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the STOR bezel softkey is selected, additional bezel softkey
labels are displayed along the ride--side of the display, shown in
Figure 15--123, which permit the pilot to modify the flight plan name and
store the flight plan when desired.
Figure 15--123
Store Flight Plan Bezel Softkey Labels
The flight plan name defaults to the departure--destination airport
format (KSAN--KSFO for example). The flight plan name can be
changed to any combination of 6 to 10 letters and numbers. The joystick
knob or touchscreen can be used to modify the flight plan name as
desired. The flight plan name field can be touched to display the
QWERTY keypad to permit quicker flight plan name entry.
Pushing the CLR bezel softkey clears the entire flight plan name.
Pushing the BKSP bezel softkey backspaces the cursor one location
and deletes the prior identifier. Pushing the DEL bezel softkey (not
shown in Figure 15--123) deletes the identifiers at the current cursor
position. Pushing the BACK bezel softkey returns to the previous
display without saving any changes.
NOTE: SIDs, STARs, approaches, and temporary waypoints are not
saved in a stored flight plan. Published airports, NAVAIDs,
intersections, custom user waypoints, waypoints that are not
part of a published procedure with non--published holds,
waypoints that are not part of a published procedure with
published holds with one altitude constraint, are saved in a
stored flight plan.