Figure 15-50 change waypoint graphically, Figure 15-51 waypoint changed – BendixKing KSN 770 - Pilots Guide User Manual
Page 328

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-55
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
The pilot can also choose to edit a waypoint graphically. To do this, the
pilot uses the touchscreen to touch the waypoint that they want to have
changed. When selected, a dashed cyan line extends from the two
existing waypoints on either side of the selected waypoint, as shown in
Figure 15--50.
Figure 15--50
Change Waypoint Graphically
The pilot can then move the cyan octagon to the desired location or
navigation waypoint on the NAV MAP for insertion. When the location
on the NAV MAP is found, pushing the
CHNG
bezel softkey changes
the selected waypoint, as shown in Figure 15--51.
Figure 15--51
Waypoint Changed