Figure 15-90 hold settings window – BendixKing KSN 770 - Pilots Guide User Manual
Page 371
Advertising

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-98
Honeywell International Inc. Do not copy without express permission of Honeywell.
When the
ADD
bezel softkey is pushed, the
Modify Parameters
window, shown in Figure 15--90, is displayed. In this window, the pilot
can modify the hold parameters by toggling the joystick knob up or down
to the desired field or using the touchscreen to select the desired field.
When the desired field is selected, the joystick knob can be rotated to
set the desired parameter. For the example flight plan, an inbound
course of 180 degrees, right--hand turns, and 1.5--minute legs is
desired.
Figure 15--90
Hold Settings Window
Advertising