BendixKing KSN 770 - Pilots Guide - Manual (Page 381)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-108
Honeywell International Inc. Do not copy without express permission of Honeywell.
Offset values are entered into the OFFSET FLIGHT PLAN window by
rotating the joystick knob. Rotating the joystick knob to the left
increases offset values to the left of course. Rotating the joystick knob
to the right increases offset values to the right of course. Offset values
have a valid range of 1 to 30 NM in 1 NM increments. When the desired
offset value is displayed, pushing the OK bezel softkey enters the
offset into the flight plan. Pushing the BACK bezel softkey returns to
the previous display without entering the offset.
For the example flight plan, an offset is desired 5 NM to the right of
course. The joystick knob is rotated to the right until 5 nm Right is
displayed, as shown in Figure 15--101. The offset is entered into the
flight plan by pushing the OK bezel softkey.
Figure 15--101
Entering Offset Into Flight Plan