BendixKing KSN 770 - Pilots Guide - Manual (Page 185)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 9-3
Traffic View
Honeywell International Inc. Do not copy without express permission of Honeywell.
The traffic view is selected by pushing the MFD bezel key then pushing
the VIEW bezel key or rotating the joystick knob until the traffic view
is displayed. The traffic view is oriented heading--up, with either a 360
or arc compass view. When the traffic view is selected, the surrounding
traffic is displayed, as shown in Figure 9--1.
Figure 9--1
Traffic View
The range scale is selected with the zoom- in/+ and zoom- out/-
bezel keys , such that the outer radius of the primary range ring
represents 2 , 3 , 5 , 10 , 15 , 20 , 30 , and 40 nautical miles
(NM) from the current aircraft position.
NOTE: The range setting is retained following a power cycle of the
unit.
When the pilot selects a range, the range is represented by the outer
ring. The inner ring is roughly half the selected range. 360 and arc
traffic views are available. Traffic advisories (TAs), proximity alerts, and
other alerts are displayed in their positions relative to the current
position and heading of the aircraft.
Supplemental traffic symbol information includes approximate altitude
difference in hundreds of feet and whether the traffic is climbing or
descending.