Database loading procedures, Introduction, Database loading overview – BendixKing KSN 770 - Pilots Guide User Manual
Page 438

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
16-1
Database Loading Procedures
Honeywell International Inc. Do not copy without express permission of Honeywell.
16. Database Loading Procedures
INTRODUCTION
This section describes how to update the various databases installed
on the KSN 765/770.
DATABASE LOADING OVERVIEW
Database updates are downloaded from the internet and installed using
a USB drive and port on the front of the unit. Instructional videos and
databases can be downloaded from the following website:
https://wingmanservices.bendixking.com/wingman/ksn.do
Database updates require a subscription. The database subscription is
paired with the unit during installation. The paired USB memory stick
is provided by the installer to the operator for performing database
updates. The database subscription can be purchased for the Americas
Region or International Region.
Database updates must be downloaded to a USB drive which is at least
8 GB in size. A USB thumb drive uniquely formatted for use with the
KSN 765/770 is supplied with the unit. Ensure the KSN 765/770 is
powered off before beginning any database updates.
The USB port is located on the front of the bezel on the
bottom left side and accepts a standard sized USB
memory stick (thumb drive). The USB port has a cover
which should be kept on until the USB port is required
for use.
CAUTION
USE OF THE USB PORT IN FLIGHT IS NOT AUTHORIZED AND
CAN CAUSE A RESET.