BendixKing KSN 770 - Pilots Guide - Manual (Page 360)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-87
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Omni Bearing Selector (OBS)
The omni bearing selector function of the FMS permits the pilot to select
a waypoint and define a course based off that waypoint to fly. Pushing
the OBS bezel softkey displays the OBS pop--up window, which the
desired waypoint can be selected from, as shown in Figure 15--78.
Figure 15--78
OBS Waypoint Window
Bezel softkey labels are displayed along the left-- and right--side of the
display, which permit the pilot to choose from various types of OBS
waypoints. The pilot can push the bezel softkey in 1R to toggle through
flight plan waypoints, previous flight plan waypoints, nearest airports,
NAVAIDs, and intersections. The touchscreen can also be used to push
the associated touchscreen buttons displayed in the header.
Temporary waypoints can be selected by pushing the PBD bezel
softkey. User waypoints can be selected by pushing the USER bezel
softkey. Flight plan waypoints are displayed by default.
For the example flight plan, an OBS is desired in reference to the Big
Sur (BSR) VOR. The joystick knob or touchscreen can be used to select
BSR from the flight plan waypoint list. When selected, the OK bezel
softkey is pushed to activate the OBS function.