BendixKing KSN 770 - Pilots Guide - Manual (Page 379)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-106
Honeywell International Inc. Do not copy without express permission of Honeywell.
Pushing the MOD bezel softkey during a hold displays the
Modify Parameters window, which allows the pilot to modify the leg
distance or time. When the holding procedure is actively flown, only the
hold leg distance or time can be modified. The FMS message UNABLE
HOLD CHANGE is displayed when anything other than the leg distance
or time is attempted to be changed while in the holding pattern.
The RESM bezel softkey label is displayed when the aircraft is in the
process of exiting the holding pattern. Pushing the RESM bezel
softkey results in the FMS resuming the holding pattern currently being
exited.
The FMS message EXITING HOLD is displayed when the hold
termination altitude has been reached and the hold is automatically
exiting.