H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 201)

20-43
3 30
4 40
3) Configuration on AC C
# Enter MST region view.
<AC C> system-view
[AC C] stp region-configuration
[AC C-mst-region] region-name example
# Configure the region name, VLAN-to-instance mappings and revision level of the MST region.
[AC C-mst-region] instance 1 vlan 10
[AC C-mst-region] instance 3 vlan 30
[AC C-mst-region] instance 4 vlan 40
[AC C-mst-region] revision-level 0
# Activate MST region configuration manually.
[AC C-mst-region] active region-configuration
[AC C-mst-region] quit
# Define AC C as the root bridge of MST instance 4.
[AC C] stp instance 4 root primary
# View the MST region configuration information that has taken effect.
[AC C] display stp region-configuration
Oper configuration
Format selector :0
Region name :example
Revision level :0
Instance Vlans Mapped
0 1 to 9, 11 to 29, 31 to 39, 41 to 4094
1 10
3 30
4 40
4) Configuration on AC D
# Enter MST region view.
<AC D> system-view
[AC D] stp region-configuration
[AC D-mst-region] region-name example
# Configure the region name, VLAN-to-instance mappings and revision level of the MST region.
[AC D-mst-region] instance 1 vlan 10
[AC D-mst-region] instance 3 vlan 30
[AC D-mst-region] instance 4 vlan 40
[AC D-mst-region] revision-level 0
# Activate MST region configuration manually.
[AC D-mst-region] active region-configuration
[AC D-mst-region] quit
# View the MST region configuration information that has taken effect.
[AC D] display stp region-configuration
Oper configuration
Format selector :0
Region name :example