H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 543)

59-1
59
Information Center Configuration
The term switch in this document refers to a switch in a generic sense or an access controller
configured with the switching function unless otherwise specified.
When configuring information center, go to these sections for information you are interested in:
z
Information Center Overview
z
Configuring Information Center
z
Displaying and Maintaining Information Center
z
Information Center Configuration Examples
Information Center Overview
Introduction to Information Center
Acting as the system information hub, information center classifies and manages system information.
Together with the debugging functionality, information center offers a powerful support for network
administrators and developers in monitoring network performance and diagnosing network problems.
By default, the information center is enabled. An enabled information center affects the system
performance in some degree due to information classification and output. Such impact becomes more
obvious in the event that there is enormous information waiting for processing.
The information center of the system has the following features:
Classification of system information
The system is available with three types of information:
z
Log information
z
Trap information
z
Debugging information
Eight levels of system information
The information is classified into eight levels by severity and can be filtered by level. More emergent
information has a smaller severity level.