60 basic configurations, Basic configurations, Entering/exiting system view – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 559
60-1
60
Basic Configurations
The term switch in this document refers to a switch in a generic sense or an access controller
configured with the switching function unless otherwise specified.
While performing basic configurations of the system, go to these sections for information you are
interested in:
z
z
Basic Configurations
This section covers the following topics:
z
z
z
z
z
z
Configuring User Levels and Command Levels
z
Displaying and Maintaining Basic Configurations
Entering/Exiting System View
Follow these steps to enter/exit system view:
To do…
Use the command…
Remarks
Enter system view from user view
system-view
—
Return to user view from system
view
quit
—
With the quit command, you can return to the previous view. You can execute the return command or
press the hot key <Ctrl+Z> to return to user view.