Protocols and standards, Ospf configuration task list – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 253

Advertising
background image

25-19

After the restart, the GR Restarter will send an OSPF GR signal to its neighbors that will not reset their
adjacencies with it. In this way, the GR Restarter can restore the neighbor table upon receiving the
responses from neighbors.

After reestablishing neighbor relationships, the GR Restarter will synchronize the LSDB and exchange
routing information with all adjacent GR-capable neighbors. After that, the GR Restarter will update its
own routing table and forwarding table based on the new routing information and remove the stale
routes. In this way, the OSPF routing convergence is complete.

Protocols and Standards

z

RFC 1765:OSPF Database Overflow

z

RFC 2328: OSPF Version 2

z

RFC 3101: OSPF Not-So-Stubby Area (NSSA) Option

z

RFC 3137: OSPF Stub Router Advertisement

OSPF Configuration Task List

Complete the following tasks to configure OSPF:

Task

Remarks

Configuring OSPF Basic Functions

Required

Configuring OSPF Area Parameters

Optional

Configuring OSPF Route Summarization

Optional

Configuring OSPF Inbound Route Filtering

Optional

Configuring ABR Type-3 LSA Filtering

Optional

Configuring an OSPF Cost for an Interface

Optional

Configuring the Maximum Number of OSPF Routes

Optional

Configuring the Maximum Number of Load-balanced Routes

Optional

Configuring a Priority for OSPF

Optional

Configuring OSPF
Route Control

Configuring OSPF Route Redistribution

Optional

Configuring OSPF Packet Timers

Optional

Specifying an LSA Transmission Delay

Optional

Specifying SPF Calculation Interval

Optional

Specifying the LSA Minimum Repeat Arrival Interval

Optional

Specifying the LSA Generation Interval

Optional

Disabling Interfaces from Sending OSPF Packets

Optional

Configuring Stub Routers

Optional

Configuring OSPF Authentication

Optional

Adding the Interface MTU into DD Packets

Optional

Configuring the Maximum Number of External LSAs in LSDB

Optional

Configuring OSPF
Network Optimization

Making External Route Selection Rules Defined in RFC1583
Compatible

Optional

Advertising