H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 74)

8-6
z
The voice traffic sent by the IP phones is tagged. Configure GigabitEthernet 0/0/1 as a Hybrid port
and as the access port, with VLAN 6 as the default VLAN.
z
The device allows voice packets from GigabitEthernet 0/0/1 with an OUI address of
0011-2200-0000 and a mask of ffff-ff00-0000 to be forwarded through the voice VLAN.
Network diagram
Figure 8-1 Network diagram for automatic voice VLAN mode configuration
Configuration procedure
# Create VLAN 2 and VLAN 6.
<AC> system-view
[AC] vlan 2
[AC-vlan2] quit
[AC] vlan 6
[AC-vlan6] quit
# Configure the voice VLAN aging time.
[AC] voice vlan aging 100
# Configure the OUI address 0011-2200-0000 as the legal address of the voice VLAN.
[AC] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000
# Enable the voice VLAN feature globally.
[AC] voice vlan 2 enable
# Configure the voice VLAN mode on GigabitEthernet 0/0/1 as automatic. (Optional, by default, the
voice VLAN mode on a port is automatic mode)
[AC] interface GigabitEthernet 0/0/1
[AC-GigabitEthernet0/0/1] voice vlan mode auto
# Configure GigabitEthernet 0/0/1 as a Hybrid port.
[AC-GigabitEthernet0/0/1] port link-type access
Please wait ...........................................Done.
[AC-GigabitEthernet0/0/1] port link-type hybrid
# Configure the default VLAN of the port as VLAN 6 and allow packets from VLAN 6 to pass through the
port.
[AC-GigabitEthernet0/0/1] port hybrid pvid vlan 6
[AC-GigabitEthernet0/0/1] port hybrid vlan 6 tagged
# Enable the voice VLAN feature on the port.
[AC-GigabitEthernet0/0/1] voice vlan enable
[AC-GigabitEthernet0/0/1] return