H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 47)

3-2
2) Establish an HTTP connection between your PC and the switch interface board, as shown in the
following figure.
Figure 3-1 Establish an HTTP connection between your PC and the switch interface board
3) Log in to the switch interface board through IE. Launch IE on the Web-based network management
terminal (your PC) and enter http://192.168.0.100 in the address bar (Make sure the route between
the Web-based network management terminal and the switch interface board is available). When
the login authentication interface (as shown in
Figure 3-2 ) appears, enter the user name and the
password admin and click Login to enter the main page of the Web-based network management
system.
Figure 3-2 The login page of the Web-based network management system