H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 36)

2-6
# Set the maximum number of lines the screen can contain to 30.
[H3C-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[H3C-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[H3C-ui-vty0] idle-timeout 6
Telnet Configuration with Authentication Mode Being Password
Configuration Procedure
To do… Use the command… Remarks
Enter system view system-view —
Enable the Telnet server function telnet server enable Required
Enter one or more VTY user
interface views user-interface vty
first -number [ last-number ]
—
Configure to authenticate users
logging in to VTY user interfaces
using the local password
authentication-mode
password
Required
Set the local password
set authentication
password
{ cipher | simple }
password
Required
Configure the command level
available to users logging in to the
user interface
user privilege level level
Optional
By default, commands of level 0 are
available to users logging in to VTY user
interface.
Configure the protocol to be
supported by the user interface protocol inbound { all | ssh |
telnet }
Optional
By default, both Telnet protocol and SSH
protocol are supported.
Set the command that is
automatically executed when a
user logs into the user interface
auto-execute command text
Optional
By default, no command is automatically
executed when a user logs into a user
interface.
Define a shortcut key for aborting
tasks escape-key { default |
character }
Optional
The default shortcut key combination for
aborting tasks is <Ctrl+C>.
Make terminal services available shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of lines
the screen can contain
screen-length screen-length
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set the history command buffer
size history-command max-size
value
Optional
The default history command buffer size
is 10. That is, a history command buffer
can store up to 10 commands by default.