Configuration procedure – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 468
Advertising
51-3
Configuration procedure
The following configuration assumes that a route from AC to the network segment 10.2.0.0/16 is
available.
# Enable UDP Helper.
<AC> system-view
[AC] udp-helper enable
# Enable the forwarding broadcast packets with the UDP destination port number 55.
[AC] udp-helper port 55
# Specify the server with the IP address of 10.2.1.1 as the destination server to which UDP packets are
to be forwarded.
[AC] interface vlan-interface 1
[AC-Vlan-interface1] ip address 10.110.1.1 16
[AC-Vlan-interface1] udp-helper server 10.2.1.1
Advertising