Configuring a priority mapping table, Configuration prerequisites, Configuration procedure – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 448: 2 configuration procedure
47-2
Imported priority value
dot1p-lp mapping
dot1p-dp mapping
1 0 0
2 1 0
3 3 0
4 4 0
5 5 0
6 6 0
7 7 0
Table 47-2
The default values of dscp-dp mapping, dscp-dot1p mapping, and dscp-dscp mapping
Imported priority value
dscp-dp mapping
dscp-dot1p mapping
dscp-dscp mapping
DSCP precedence
(dscp)
Drop precedence (dp)
802.1p precedence
(dot1p)
DSCP precedence
(dscp)
0 to 7
0
0
0
8 to 15
0
1
8
16 to 23
0
2
16
24 to 31
0
3
24
32 to 39
0
4
32
40 to 47
0
5
40
48 to 55
0
6
48
56 to 63
0
7
56
You cannot configure to map any DSCP value to drop precedence 1.
Configuring a Priority Mapping Table
You can modify the priority mapping tables in a switch as required.
Follow the two steps to configure priority mapping tables:
z
Enter priority mapping table view;
z
Configure priority mapping parameters.
Configuration Prerequisites
The new priority mapping table is determined.
Configuration Procedure
Follow these steps to configure a priority mapping table: