H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 446)

46-6
To do… Use the command… Remarks
Enter system view system-view —
Enter port view
interface interface-type
interface-number
Enter port
view or port
group view
Enter port
group view
port-group { manual
port-group-name | aggregation
agg-id }
Perform either of the two operations.
The configuration performed in
Ethernet port view applies to the current
port only. The configuration performed
in port group view applies to all the
ports in the port group.
Configure SP queue
scheduling
qos wrr queue-id group sp
Required
By default, all the ports adopt the WRR
queue scheduling algorithm, with the
weight values assigned to queue 0
through queue 7 being 1, 2, 3, 4, 5, 9,
13, and 15.
Configure WRR queue
scheduling qos wrr queue-id group group-id
weight queue-weight
Required
Configuration Examples
Network requirements
z
Configure to adopt SP+WRR queue scheduling algorithm on GigabitEthernet0/0/1.
z
Configure queue 0, queue 1, queue 2 and queue 3 on GigabitEthernet0/0/1 to be in SP queue
scheduling group.
z
Configure queue 4, queue 5, queue 6 and queue 7 on GigabitEthernet0/0/1 to be in WRR queue
scheduling group, with the weight being 2, 4, 6 and 8 respectively.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enable the SP+WRR queue scheduling algorithm on GigabitEthernet0/0/1.
[Sysname] interface GigabitEthernet 0/0/1
[Sysname-GigabitEthernet0/0/1] qos wrr 0 group sp
[Sysname-GigabitEthernet0/0/1] qos wrr 1 group sp
[Sysname-GigabitEthernet0/0/1] qos wrr 2 group sp
[Sysname-GigabitEthernet0/0/1] qos wrr 3 group sp
[Sysname-GigabitEthernet0/0/1] qos wrr 4 group 1 weight 2
[Sysname-GigabitEthernet0/0/1] qos wrr 5 group 1 weight 4
[Sysname-GigabitEthernet0/0/1] qos wrr 6 group 1 weight 6
[Sysname-GigabitEthernet0/0/1] qos wrr 7 group 1 weight 8
Displaying and Maintaining Congestion Management
To do… Use the command… Remarks
Display WRR queue configuration
information display qos wrr interface
[ interface-type interface-number ]
Display SP queue configuration
information display qos sp interface
[ interface-type interface-number ]
Available in any view