H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 551)

59-9
To do… Use the command… Remarks
Configure the output rules of the
system information
info-center source
{ module-name | default } channel
{ channel-number | channel-name }
[ debug { level severity | state
state
} * | log { level severity | state
state } * | trap { level severity |
state state } * ] *
Optional
Refer to
Table 59-4 for the output
rules of the system information.
Configure the format of the time
stamp for log information info-center timestamp loghost
{ date | no-year-date | none }
Optional
date by default.
Setting to Output System Information to the Trap Buffer
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 59-2 for default
channel names.
Configure the channel through
which system information can be
output to the trap buffer and specify
the buffer size
info-center trapbuffer [ channel
{ channel-number | channel-name }
|
size buffersize ] *
Optional
System information is output to the
trap buffer by default with a default
channel of channel 3 (known as
trapbuffer) and a default buffer size
of 256.
Configure the output rules of the
system information
info-center source
{ module-name | default } channel
{ channel-number | channel-name }
[ debug { level severity | state
state
} * | log { level severity | state
state } * | trap { level severity |
state state } * ] *
Optional
Refer to
Table 59-4 for the output
rules of the system information.
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot |
date
| none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Setting to Output System Information to the Log Buffer
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default.
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 59-2 for default
channel names.