Displaying and maintaining device configuration – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 529
56-9
Displaying and Maintaining Device Configuration
To do…
Use the command…
Remarks
Display the configuration file saved
in the storage device
display saved
-configuration
[ by-linenum ]
Available in any view
Display the configuration file used
for this and next startup
display startup
Available in any view
Display the validated configuration
in current view
display this
[ by-linenum ]
Available in any view
Display current configuration
display current-configuration
[ [ configuration [ configuration ] |
controller
| interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | include | exclude } text ] ]
Available in any view
For detailed description of the display this and display current-configuration commands, refer to the
System Maintaining and Debugging
in H3C WX6103 Access Controller Switch Interface Board
Configuration Guide.